Flow Visualization of Filling with Aid of Colored Billets During Impact Micro-Injection Molding

Modelling of Cyclic 3-Dimensional Heat Transfer in Injection Moulding

Microinjection Molding with LIGA-Like Process

A New Design Method to Improve Flow Uniformity in a Reaction Injection Mold Entry

Three Dimensional Analysis of Shape Deformation in Injection Molded Optical Lens

Development of a Hybrid Solid-Microcellular Co-injection Molding Process

The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection Molding
Part I: Dependence on Viscosity and Injection Speed of Skin/Core Materials

Investigation of the Mechanical Properties and Chemical Resistance of PC/PBT/Impact Modifier Blends

Structure Development in Injection Molding of Isotactic Polypropylene, its Blends, Compounds and Dynamic Vulcanizates

The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection
Part II: Influence of Mold Cavity Thickness and Core Cylinder Temperature

Analysis of the Morphological Development of PBT/ABS Blends during the Twin Screw Extrusion and Injection Molding Processes

On the Residual Stress and Shrinkage in Injection Compression Molding

Relevance of Crystallisation Kinetics in the Simulation of the Injection Molding Process

Causes of Cracks in Petaloid Bottom of Carbonated PET Bottle

Filling and Postfilling Analysis of Injection/Compression Molding

Analysis of Flow and Heat Transfer in Liquid Composite Molding

Solidification Criterion on Shrinkage Predictions for Semi-crystalline Injection Moulded Samples

Polymer Melt Rheology at High Shear Rates

Factors Affecting the Stability of Gas Penetration in Gas Assist Injection Molded Bifurcation Parts

Transient Polymer Flow Rate in Injection Mold Filling

Flow Analysis of Injection-Press Molding Process

Properties of Injection Molded In Situ Composites Based on PPS and a Melt Processable Glass

A New Approach in Offline-Optimization of the Injection Molding Process

Viscoplastic Material Modeling for the Stretch Blow Molding Simulation

The Effects of Compression Pressure on Injection Compression Molding

Numerical Simulation of Compression Molding of UHMWPE
Part I. Thermal Model

Numerical Simulation of Compression Molding of UHMWPE
Part II. Residual Stress Model

Mechanical Properties of Isotactic Polypropylene with Oriented and Cross-hatched Lamellae Structure

Morphological Characterisation of Long Glass Fibre Composites for the Thermoforming Process

Compressive Squeeze Flow of Generalized Newtonian Fluids with Apparent Wall Slip

Comparative Study of Ziegler-Natta and Metallocene Based Polypropylenes in Injection Molding

Polymer Solidification under Pressure and High Cooling Rates

The Pressure-Volume-Temperature Behavior Polyethylene Melts

Evaluation of the Thermal Behaviour of Injection Moulds

Blank Design and Fiber Orientation Distribution During Compression Molding of GMT

Injection Moulding of a Commercial β-Nucleated Polypropylene

Weld Line Strength in PC/ABS Injection Moldings

Computer Controlled Rotational Molding of a Hollow Femur for 3-D Photoelastic Analysis

Generalized Predictive Observer-Controller For Injection Moulding

Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer
(Part I: Theoretical Formulation)

Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer
(Part II: Experiment and Simulation)

Fiber Orientation in 3-D Injection Molded Features
Prediction and Experiment

Fitting of K-BKZ Model Parameters for the Simulation of Thermoforming

Long Glass Fibre Reinforcement of Thermo Plastics
Experimental and Theoretical Results for Injection and Blow moulding, Sheet and Pipe extrusion

Tensile Damage in Ternary Melamine-Formaldehyde Composites

Breakage and Buckling of Fibrous Reinforcements During Fabrication of Thermoplastic Matrix Composites

Optimization of the Weldline Strength in Gas-assist Injection Molded Thermoplastic

Injection Velocity Control Using A Self-tuning Adaptive Controller

Advances in On-line Monitoring of the Injection Molding Process Using Ultrasonic Techniques

Analysis of Shrinkage Development of Injection Moulded PS Samples

Simulation and Verification of Melt Flow and Secondary Gas Penetration During Gas-Assisted Injection Molding

Process Optimization of Thermoforming PP/CaCO₃ Composites

A Stiffness Criterion For Cooling Time Estimation

Structure and Properties of Injection Moldings of β-Crystal Nucleator-added PP
Part 6, Addition of β-Crystal Nucleator to Particulate-filled Polypropylenes

Structure and Properties of Injection Moldings of β-Crystal Nucleator-added PP
Part 5, Co-addition of β- and α-Crystal Nucleators

Consistency and Flexibility of Multi Cavity Melt Control

Simulation of Reactive Liquid Composite Molding
Using An Eulerian–Lagrangian Approach

Warpage of Injection Moulded Plates and Corner Products

Crystal Orientation in Injection Moldings of Talc-filled Polyolefins

Measurement and Prediction of Anisotropy in Injection Moulded PP Products

Structure and Properties of Injection Moldings of β-Crystal Nucleator-added PP
Part 4, Effect of Copolymerizations with Ethylene of Base Resin

Morphology of Injection Molded Polyacetal during Filling

Impregnating Flow of a Rheokinetic Liquid

Thermal Effects in the Numerical Simulation of the Thermoforming of Multilayered Polymer Sheets

Melt Flow Instabilities of Filled HDPE

Experimental Validation of Shrinkage Predictions for Injection Molded Products

The Occurrence of Flow Marks during Injection Molding of Linear Polyethylene

In-Mould Shrinkage Measurements of PS Samples with Strain Gages

Physically-Based Adaptive Control of Cavity Pressure in Injection Molding: Filling Phase

Studies of the Trans-Quinacridone Nucleation of Poly-(ethylene-b-propylene)
Dedicated to the memory of Prof. Morand Lambla

Rheology of Layered Thermoplastic Matrix Composites during Compression Molding

The Role of Long Molecules and Nucleating Agents in Shear Induced Crystallization of Isotactic Polypropylenes

On the Simulation of Thermoplastic Injection Moulding Process
II Relevance of Interaction Between Flow and Crystallization

The Crystallinity of PVC and its Effect on Physical Properties

Molecular Orientation in Polycarbonate Induced by Cooling Stresses
On the Origin of the Surface Maximum

Effect of Pressure and Shear Stress on Crystallization Behaviors in Injection Molding

Physically-Based Model of Thermoplastics Injection Molding for Control Applications

Development of a Computer Simulation of SCORIM
In-mould Shearing with Cooling and Solidification

The Effect of Injection Molding Conditions on the Mechanical Properties of an In Situ Composite
Polypropylene and a Liquid Crystalline Copolyester Based on Poly(ethylene terephthalate) co Poly(hydroxybenzoic acid)

Structures and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylenes
Part 3 Comparison of Nucleating Effect Between γ-Quinacridone and Quinacridonequinone

Microstructure Evolution During Moulding of Particulate-Reinforced Thermoplastic Composites

Defects in Resin Transfer Molded Plaques Due to Resin Age Distribution During Mold Filling

An Assessment of Thermal Stresses in Injection Moulded ABS Copolymer

Inverse Modeling of Injection Molding Thermal Stresses to Optimize Temperature and Pressure History

Structure and Properties of Inflation Films of β-Phase Nucleating Agent-Added Polypropylene

Surface Defect Formation in the Injection Molding of Acrylonitrile-Styrene-Acrylate Polymers

Injection Molding of Microcomposites Based on Polypropylene and Thermotropic Liquid Crystalline Polymers

Analysis of the Local Volume Flow Rate of Polymers During Injection Molding

Analysis of the Mold Filling Process with Phase Change Considering the Non-steady Effect

Comparative Wide-angle X-ray and Microscopical Studies on the Layered Structure in Injection Molded Polypropylene Disks

Cooling Process Window Development for Injection Molding

Modeling and Finite Element Analysis of Flow in SMC Compression Molding

Measurement of Planar Orientation of Fibers for Reinforced Thermoplastics Using Image Processing

Study on the Performance of Cooling Systems in Precision Injection Molds

Structure and Properties of Injection Moldings of β-Crystal Nucleator-Added Polypropylene
Part 2 Effect of MFI of Base Resin

On the Limitations of Shear Induced Crystallization in Polypropylene Melts
Dedicated to Prof. F. R. Schwarzl, Erlangen, on the occasion of his 70th birthday

Elastic Calculation of Residual Stresses in Injection Molding
Influence of Mold Deformation and Pressure in the Liquid

Structures and Properties of Injection Molding of β-Crystal Nucleator-Added Polypropylenes
Part 1 Effect of β-Crystal Nucleator Content

Crystallization Behavior of Carbon Fiber Reinforced Polyamides (I) Dynamic and Isothermal Crystallization

Modelling and Experiments of Squeezing Flow of Polymer Melts

Control Volume Finite Element Method for Mold Filling Simulation

Flexural Stiffness of Injection Molded Glass Fiber Reinforced Thermoplastics

Polyarylamide/Polypropylene Blends
Relations Between Rheology, Morphology and Injection Molding

Simulation of Heat Transfer and Melting in Rotational Molding

On the Simulation of Thermoplastic Injection Moulding Process

Integral Constitutive Model (K-BKZ) to Describe Viscoelastic Flow in Injection Molding

Multilayer Injection Moulding
Part 2: Particle tracking in reactive moulding

Miscibility and Mechanical Properties of Poly(ether imide)/Liquid Crystalline Poly(ester imide) Blends

The Effects of Recycling and Degradation on Parison Extrusion

Modeling and Simulation of High Reynolds’ Number Flows During Reaction Injection Mold Filling

Finite Element Simulation of Thick Tube Expansions

Flexural Modulus of Compression Molded Glass Fiber Reinforced Thermoplastics

Short Glass Fiber Reinforced PA 6 and ABS Blends
Mechanical Properties and Morphology

Image Simulation and Evaluation of Fiber Orientation Distribution

Equation of State for Pure Polymeric Fluids Theory Based on An Improved Hole and Cell Model

Unsteady Flow of Semi-Concentrated Fiber Suspensions in Compression Molding

Residual Stresses in Quenched and Injection Moulded Products